Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems

Cover
Half Title
Title Page
Copyright Page
Table of Contents
Preface
Committees of the SEMC 2022 International Conference
1. Keynotes
	Metal additive manufacturing in structural engineering: Review, opportunities and outlook
	Computational modeling of FRC: From 3D printing to robust design
	FRP strengthening of metallic structures: From research to practice
	In-test analytical model updating for accurate hybrid dynamic simulations
	Value of vibration-based structural monitoring for bridge emergency management
	Understanding tensegrity with an energy function
2. Dynamic analysis, Vibration response, Vibration control, Environmental vibrations, Fluid-structure interaction
	Bridge flutter and how to prevent it at low cost
	Early assessment of the vibroacoustic performance of large lightweight buildings
	Modal analysis of CLT beams: Measurements and predictive simulations
	Optimal design of viscoelastic tuned mass dampers for structures exposed to coloured excitations
	Numerical investigation on train-bridge interaction after ship impact event: Train running safety in different scenarios
	Research advancement on Submerged Floating Tunnels: Recent activity at DICA-Politecnico di Milano
	The influence of near-surface soil layer resonance on vibrations in pile foundations
	Prediction of flutter velocity of long-span bridges using probabilistic approach
	The effect of pile slip on underwater noise emission in vibratory pile driving
	Dynamic analysis of highly symmetric cable dome structures
	Vibroacoustic performance of multi-storey buildings: Acomparison of lightweight and heavy structures in the early design phase
	Effect of modelling the air in rooms on the prediction of vibration transmission in cross-laminated timber buildings
	Numerical analysis of transversely isotropic unsaturated railway ground vibrations under amoving load using 2.5D FEM
	Incremental dynamic analysis of ahospital building in Oman
	Dynamic response of parabolic reflector antenna subjected to shock load and base excitation considering soil-structure interaction
	Effect of Cape storms on the flat roof-mounted solar panels
	Evaluating static and modal responses of asmall scale conventional and bio-inspired wind turbine blade
3. Seismic response, Seismic analysis, Earthquake-resistant design
	Functional elements exploiting superelasticity and the shape memory effect of Fe-Mn-Al-Ni-X shape-memory-alloys in structural engineering
	Seismic response of curved structures in historical masonry churches
	Recent advances in tsunami design of coastal structures
	Load-Level Isolation System for industrial racks: Evaluations on acase study structure
	Seismic considerations in the dynamic characteristics of masonry infilled RC frames based on experimental tests
	Structural plan and design of bridge deck isolation system for seismic redundancy
	Study on seismic performance of fully bolted joints
	Effects of in-plan irregularity of RC framed buildings on the out-of-plane nonlinear seismic response of masonry infills
	Influence of infill walls on lateral load carrying capacity of buildings
	Simulation of many acceleration time histories with causality from an observed earthquake motion: Modeling of real part and reproduction of imaginary part by Hilbert transform
	Dynamic characterization of the Tower of Palazzo dei Vicari in Scarperia (Italy) during and after the 2019 Mugello seismic sequence
	Push-over tsunami analysis using ETABS
	Seismic fragility of corroded reinforced concrete highway bridges
	Assessment of the inter-story isolation technique applied to an existing school building
	Effects of frequency content of ground motions on seismic response of concrete gravity dams with varying reservoir levels
	Aproposal for improving the elastic behaviour of dogbone
4. Material modelling, Multi-scale modelling, Micromechanical modelling, Porous media, Biological tissue
	Multiscale modelling in materials science and technology
	A multiscale approach to investigate residual stresses due to targeted cooling of hot bulk formed parts
	Introduction to lattice discrete particle model for thermoset polymers
	Artificial neural networks as material models for finite element analysis
	Simulations of elasto-plastic soils within the framework of the theory of porous media
	A coupled multi–field dynamic model for anisotropic porous materials
	Micromechanical modelling of failure during interactions between ice and subsea structures
	Variational formulation of weak layer stresses in stratified snowpacks
	An exact stiffness matrix method for nanoscale beams
	On the deformation of porous spherical shells and other spherical bodies
	Application of quasi-linear viscoelasticity for the characterisation of human buttocks adipose tissue
	Nonlocal beam analysis based on the stress-driven two-phase theory
	Modeling the hysteresis behavior of recycled rubber fiber reinforced bearings
	Numerical permeability prediction of multiscale textile architectures with varying contact angle and surface tension
	Data-driven design of high ductile metamaterials under uniaxial tension
	Modelling of biaxial tensile behaviour of the tracheal tissue using three exponential-based hyperelastic constitutive models
	Evaluating the tensile behaviour of rat myocardium across its three walls from biaxial tensile test data
	Investigation of the performance of different constitutive models on omasum uniaxial tensile behaviour
	Evaluating computational performances of Yeoh, Veronda-Westmann and Humphrey models on supraspinatus tendon uniaxial stress-strain behaviour
5. Additive manufacturing, Manufacturing processes, Assembly processes, Kinematics
	Robot supported wire arc additive manufacturing and milling of steel columns
	Global sensitivity analysis of sand-based binder jet 3D printed material
	Influence of process irregularities in additively manufactured structures
	Characterization of 3D printed concrete beams after exposure to high temperature
	Experimental studies on the mechanical response for structural design of wire-and-arc additively manufactured stainless steel bars
	Tolerance-free assembly of heat-treated reinforced concrete modules with geometric deviations
	Dimensional accuracy of casting patterns produced by selected 3D printing technologies
	The effect of wind on 3D printed concrete interlayer bond strength based on machine learning algorithms
	Tensile test of double-lap GFRP joint applying Vacuum Infusion wrapping
	Multiscale analysis of surfaces made with additive technology in medical aspects
	Bio-inspired kinematics of reconfigurable linkage structures
	Tribological analysis of selected 3D printing technologies in the context of building foundry models
	A case study of structural optimization for additive manufacturing
6. Composite structures, Laminated structures, Sandwich structures, Adaptive structures, Numerical modelling, Numerical simulations
	Piezoresistive sensor matrix for adaptive structures
	Numerical modelling of the residual burst pressure of thick composite pressure vessels after low-velocity impact loading
	Influence of interfacial debonding on the nonlinear structural response of profiled metal-faced insulating sandwich panels
	Accurate numerical integration in 3D meshless peridynamic models
	Phase field topology optimization of elasto-plastic contact problems with friction
	Computational analysis of magma-driven dike and sill formation mechanisms
	Numerical analysis of a high-rise building near sensitive infrastructures
	Moment support interaction of multi-span sandwich panels
	Influence of temperature on sandwich panels with PU rigid foam
	Minimum weight design of CNT/fibre reinforced laminates subject to afrequency constraint
	On the application of CFD and MDO to aircraft wingboxes using commercial software
7. Damage mechanics, Damage modelling, Blast, Impact, Fracture, Fatigue, Progressive collapse, Structural robustness
	Research on structural robustness through large-scale testing
	Using optical diagnostics for near field blast testing
	Experimental evaluation of composite floors under column loss scenarios
	The role of infills modelling in progressive collapse capacity assessment of RC buildings: Acase study
	Computational study on the progressive collapse of precast reinforced concrete structures
	Assessment on impact response analysis by chord member fracture of steel truss bridge
	Lumped plasticity approach for the robustness assessment of structures
	Progressive collapse resistant design of tall buildings under fire load
	A multi-scale approach for quantifying the robustness of existing bridges
	Interpretation of collapse modalities for atimber roof truss
	Blast response of arching masonry walls: Theoretical and experimental investigation
	Blast behaviour of natural fibre composites: Response of medium density fibreboard and flax fibre reinforced laminates
	Comparison of TNT to PE4 charge using asimplified rigid torso
	Blast performance of retrofitted reinforced concrete highway bridges
	Investigation of permanent indentation due to low velocity impact on glass fibre reinforced plastics
	Advanced fatigue assessment methods: The future of modern wind turbines
	Fatigue damage in thick GFRP laminate through the vibration-based bending fatigue experiment
	Decoupling method for fracture modes in an orthotropic elastic material through a three-dimensional vision
	Investigation on 3D printed dental titanium Ti64ELI and lifetime prediction
	Detection of fatigue damage via neural network analysis of surface topography measurements
	Notch stress analysis on reinforcing steel bars using FE-simulations considering surface topography and structure properties
	Crashworthiness analysis of conical energy absorber filled with aluminum foam
	Numerical and experimental analysis of the triggering mechanism of the passive square thin-walled absorber
	Theoretical and experimental investigation into area increase of longitudinal cracks in pressurised pipes
	Numerical study of dynamic collapse resistance of an RC flat plate substructure under an interior column removal scenario
8. Buckling of Beams, Columns and Thin-walled sections
	Harnessing instabilities within metamaterial structures
	Plastic buckling of fixed-roof oil storage tanks under blast loads
	Modelling thin-walled members by means of the dynamic approach within the Generalised Beam Theory (D-GBT)
	On energy based flexural-torsional buckling criteria of double-tee shape elastic thin-walled members
	An individual shear deformation theory of beams with consideration of the Zhuravsky shear stress formula
	Elastic shear buckling of beams with sinusoidal corrugated webs
	Buckling check under biaxial loading considering different launching bearings and eccentric load introduction
	Lateral-torsional buckling of steel double-tee shape beams based on the decomposition of transverse load combinations
	Flexural-torsional buckling of steel double-tee shape beam-columns with lateral-torsional discrete restraints
	Influence of symmetry on the buckling behaviour of plane frames
	Machine learning optimization strategy for the inelastic buckling modelling of uncorroded and corroded reinforcing plain bars
	Numerical study of distortional buckling of single channels restrained by angle cleats
	Experimental investigation of distortional buckling of single channels restrained by angle cleats
9. Plates, Shells, Membranes, Cable nets, Cable-stayed structures, Lightweight structures, form-finding, Architectural considerations
	Principle of constant stress in analytical form-finding for durable structural design
	Extraordinary mechanics in slender structural surfaces
	Asymmetric multifocal egg-like shells with elastic adaptive frameworks
	Analysis of constructional errors of in-service spatial prestressed steel structures
	Examples of application of principle of superposition and rules of symmetry in engineering design
	Full-scale tests of alightweight footbridge: The Folke Bernadotte Bridge
	Numerical analysis of new assembled cable dome ring truss connections
	Anumerical displacement-based approach for the structural analysis of cable nets
	Analytical and numerical analysis of anchored flexible steel liquid storage tanks subjected to seismic loads considering soil structure interaction
	Parametric study of the catenary dome under gravity load
10. Structural applications of glass
	Structural bonding with hyperelastic adhesives: Material characterization, structural analysis and failure prediction
	Reinforced glass: Structural potential of cast glass beams with embedded metal reinforcement
	Investigations on the concept of hybrid bonding in glass structures
	Topologically optimized structural glass megaliths: Potential, challenges and guidelines for stretching the mass limits of structural cast glass
	Rotational stiffness and strength of a two-sided reinforced laminated glass beam-column joint prototype: Experimental investigation
	Transparent smoke barriers
	Experimental investigations on EVA interlayers in the regime of large deformations in the context of the examination of the residual load bearing capacity of LSG
	In-plane loaded glass balustrades as structural members for balconies
	Thermal loads in triple glazing: Experimental and numerical case study
	Influence of the interlayer core material in thin glass–plastic composite panels on performance characteristics according to the requirements for laminated safety glass
	Load analysis for the development of abonded edge seal for fluid-filled insulating glazing
	The strength of glass with digital printing
	Numerical simulation of the heat flow through laminated glass beams exposed to fire: Aparametric study
11. Steel structures, Steel connections, Steel-concrete composite construction, Cold-formed steel
	Full-scale tests of industrial steel storage pallet racks
	Tests of cold-formed steel built-up open section beam-columns subjected to unequal end moments
	Numerical analysis on semi-rigid pin joint for modular assembled steel reticulated shell
	Experimental study on shallow H-shaped steel column under combined loading condition
	Experimental tests on the rack-to-spine-bracing joints of high-rise steel storage racks
	Experimental and numerical evaluation of various solutions for fire protection of steel structures
	Microstructure and corrosion resistance of dissimilar welded joints
	3D models of clad steel structures: Assumptions and validation
	Fatigue resistance of steel arch bridge hanger connection plates due to transverse welding
	Numerical simulation and design of steel equal-leg angle section beams
	Behaviour of steel end plate bolted beam-to-column joints
	Compression strength of aged built-up column with vanished lacing bars
	Machine learning approach for stress analyses of steel members affected by elastic shear lag
	Behaviour and recommended design method for laterally unsupported monosymmetric steel I-section beams
	Steel beam upstands as astrengthening approach for hot-rolled I-shaped sections
	Bending capacity of single and double-sided welded I-section girders: Part1: Experimental investigations
	Bending capacity of single and double-sided welded I-section girders: Part2: Simplified welding simulation and buckling analysis
	Issues related to the assessment of an existing reinforcement of alattice telecommunication tower
	Relating stress concentrations in triangular steel bridge piers to simple beam models
	Experimental investigation of the rack-to-bracing joints between the high-rise steel storage rack frames and the independent bracing towers
	Optimum design of hat cold-formed steel members using direct strength method
	Performance of light gauge cold-formed steel flexural members subjected to non-uniform fire
	Static strength capacity of single-sided fillet welds
	Influence of web openings on the load bearing behavior of steel beams
	Effects of elevated temperatures on cold-formed stainless steel double shear bolted connections
	Simplified approach to calculate welding effect for multi-layer welds of I-girders
	Resistance of axially and eccentrically loaded steel column at high temperature: Asimple expression
	Large-scale fire testing of an innovative cellular beam and composite flooring structural system
	Design for de-construction of lightweight infill wall systems
	Calibration and validation of slender circular CFDST columns subjected to eccentric loading
	Investigation of CDP parameters and concrete confinement models for use in circular slender CFDST columns subjected to eccentric loading
	Evaluation of parameters which influence circular slender CFDST columns subjected to eccentric loading
	Evaluating the effect of load eccentricity on slender circular CFDST columns
	Shear capacity of the Truedek steel decking system in the formwork
	Numerical modeling for connections of staggered single channel rafters in double-bay cold-formed steel portal frames
	Numerical modeling of gusseted internal eaves connection of double-bay cold-formed steel portal frames using single channels
	Stub concrete-filled double-skin circular tubes in compression
12. High strength steel, High performance steel
	Welded connections of high-strength steels
	A 3D constitutive model of high-strength constructional steels with ductile fracture
	Investigation of the effects of an over-elastic preload on the load-bearing behavior of high-strength bolt and nut assemblies
	Bending effects on the fatigue strength of non-load-carrying transverse attachment joints made of ultra-high-strength steel
	Mechanical properties of thin-walled high-strength-steel cold-formed circular hollow sections for crane and scaffolding construction
	A basic study on the evaluation of residual axial force of high strength bolts for steel bridges constructed in the same environment at different ages
	Design methodology of grade 12.9 bolts considering hydrogen-induced delayed fracture
	Influence of high strength steel on the fatigue of welded details
	Influence of residual stresses on innovative composite column sections using high strength steel
	Experimental and numerical study of butt welded joints made of high strength steel
	Behaviour of cold-formed high strength steel tubular X-joints with circular braces and rectangular chords
	Experimental investigation on cold-formed high strength steel tubular T-joints after fire exposures
	Study on mechanical properties of high-strength steel butt-welded joints
13. Reinforced concrete structures, Prestressed concrete, Concrete structural elements, Mechanics of concrete
	Using nonlinear finite element modeling for punching shear design of concrete slabs
	Design of precast concrete framing systems against disproportionate collapse using component-based methods
	Semi-probabilistic nonlinear assessment of post-tensioned concrete bridge made of KT-24 girders
	Punching shear behavior of continuous flat slabs: A new test setup incorporating system influences
	Live load test for pedestrian bridge constructed with innovative concrete bridging system
	Estimating post-punching capacity and progressive collapse resistance of RC flat plates using shell-based FEA
	Long-term deformation of segmented prestress bridges under harsh weather conditions: Case study of Exit 23 Interchange at Riyadh Ring Road
	Shear capacity of concrete elements with reinforcement made of steel and FRP
	Characterization of major reinforcing bars for concrete works in Botswana construction industry
	Modelling temperature and stress development in large concrete elements under sequential construction conditions: Experience with the Msikaba Bridge foundations
	Experimental assessment of crack width estimations in international design codes
	RC flooring system recycling plastic bottles: New innovative RC waffle slab
	Investigations on shear transfer by aggregate interlock with aunique test setup (TorAx)
	The continuous spalling of reinforced concrete structures of the three bridges on the Lagos lagoon in Nigeria
	Theoretical analysis and experimental test results calibrated from concrete beams
	Behaviour of reinforced concrete beams enhanced with polymer modified ferrocement
	Shear capacity of rib and block slab systems
14. High strength concrete, High performance concrete, Fibre-reinforced concrete, Fatigue behaviour of HPC and UHPC
	Phase-field modeling for damage in high performance concrete at low cycle fatigue
	Macroscopic model based on application of representative volume element for steel fiber reinforced high performance concrete
	Potential of shape memory alloys in fiber reinforced high performance concrete
	Homogenisation of the material behaviour of UHPFRC under tension
	Numerical and experimental analysis of fatigue-induced changes in ultra-high performance concrete
	Damage development of steel fibre reinforced high performance concrete in high cycle fatigue tests
	Fatigue behavior and crack opening tests under tensile stress on HPSFRC: Experimental and numerical investigations
	Influence of concrete compressive strength on fatigue behaviour under cyclic compressive loading
	Influence of loading frequency on the compressive fatigue behaviour of high-strength concrete with different moisture contents
	Influence of the concrete moisture content on the strain development due to cyclic loading
	Influence of moisture content on strain development of concrete subjected to compressive creep and cyclic loading
	Behavior of coupled walls with high performance fiber reinforced concrete coupling beams
15. Safety and reliability, Design philosophy, Bridge technology, Transport infrastructure, Building performance, Engineering education
	Structural reliability estimates by Slepian models
	Framing of the design base for load bearing structures against climate change
	Mechanical properties of stainless steel coatings formed by build-up spraying
	Implication of constructing the new Umhlatuzana River bridge deck monolithically with the existing deck
	Field and desktop survey on failures of rail to concrete connections in South African track on concrete ballastless railway systems
	Long term energy efficiency of non-conventional building systems: Use of Polyblocks in improving thermal performance
	Cooling materials that help save lives in the context of Covid-19’s economic recession
	Research for achieving high quality air in architecture and urban planning on the example of the educational and sports center in Józefów near Warsaw Poland
	Microorganisms and the healthy built environment
	Do we still need structural	 engineers?
	Facilitated team-building processes to enhance teamwork skills in engineering education
	Peer review of teaching/learning paradigms: Anew proposal for engineering education
	16. Structural applications of FRP composites
	Case studies of repurposing FRP wind blades for second-life new infrastructure
	Prediction on stress-strain behavior of FRP-confined concrete with passive confinement-based 3D constitutive model
	Development and testing of new precast concrete tunnel segments reinforced with GFRP bars and ties
	An experimental study on the compression behavior of CFRP-jacketed plastered low-strength RC columns
	Parametric study of CFFT systems for small-scale wind turbine towers
	Estimating shear strengths of glass fibre reinforced polymer reinforced concrete deep beams with indeterminate strut-and-tie models
	State of the art in research and field applications of post-tensioned structures strengthened with prestressed composites
	Reinforcement made of Basalt Fibre Reinforced Polymer (BFRP):Load-bearing capacity, durability and applications
	Onsite manufacturing and applications of FRP pipes
	Bolted and hybrid beam-column joints between I-shaped FRP profiles
	Performance of self-drilling screw connections for structural pultruded fibre reinforced polymer composites
	Sustainable sandwich composites made of recycled plastics
	Flexural characteristics of bio-based sandwich beams made of paper honeycomb cores and flax FRP skins
	Behavior of NSM FRP flexurally-strengthened RC beams with embedded FRP anchors
	Standardization, guide development and long-term durability of fiber reinforced polymers (FRP): In situ field results from FRP RC bridge decks after 15+ years of service exposure
	Strength behaviour of fibre reinforced polymer concrete beams under flexural loading
	Properties of a37mlong FRP wind turbine blade after 11 years in service
	The axial behavior of the low and extremely low strength concrete confined with large-rupture-strain PET-FRPs made of production wastes
	Unique FRP solutions for structural repair of piles, seawalls and decks
	Evaluation of using FRP bond equations in alternative types of advanced composite externally bonded to concrete
	Sustainable and corrosion-free bridge structures
17. Construction technology, Construction projects, Construction materials, Properties of concrete
	Full-scale experiments on hybrid tunnel lining segments
	Environmental inefficiency of the world construction industry
	Natural language processing as work support in project tendering
	Improvement of mechanical performance of cement-based composites using anew type of low-cost low-energy demand graphene
	Relationship between flexural strength and compressive strength in concrete and ice
	Comparison and statistical evaluation of Marshall stability and stiffness modulus for asphalt mixtures
	Using recycled concrete aggregate from bombed building in new concrete
	Using waste from paint manufacturing in concrete
	Considerations regarding the toxicity of construction and building materials
	Fire performance of metakolin concrete and mortar blends using Nigerian kaolinite clays
	Rheological and strength characterisation of limestone calcined clay cement 3D printed concrete
	Fresh properties and strength evolution of slag modified fibre-reinforced metakaolin-based geopolymer composite for 3D concrete printing application
	Expression for calculating the compressive strength of concrete containing Rice Husk Ash
	Compatibility issues between dehydrated calcium sulphate cement and plasticiser/superplasticiser
18. Timber structures, Timber technology, Properties of wood
	Reliability of statically indeterminate timber structures: Modelling approaches and sensitivity study
	Future perspectives about timber-hybrid systems: The role of connections
	Recent developments in timber-concrete composite construction
	Improving the modelling of tall timber buildings
	Influence of initial crack width in Mode Ifracture tests on timber and adhesive timber bonds
	Laminating effect in South African pine glue laminated timber beams
	Development of cross-laminated timber composite panels from C16 timber
	Influence of knots and density distribution on compressive strength of wooden foundation piles
	The effect of wood microstructure on the mechanical properties of some selected tropical hardwood species used in construction
	Mechano-sorptive behaviour on crack propagation of notched beams of Okume
	Link between growth strategies and physical-mechanical properties of wood of tropical species from Gabon
	High performance light timber shear walls and dissipative anchors for damage limitation of wooden buildings in seismic areas
	Creep tests on notched beams of silver fir wood (Abies alba)
19. Structural health monitoring, Damage detection, System identification, Maintenance, Durability, Long-term performance
	Structural health monitoring in civil engineering: Status and trends
	Development of vibration-based early scour warning system for railway bridge piers
	Vibration-based Bayesian anomaly detection of PC bridges
	Vibration-based structural health monitoring of bridges based on anew unsupervised machine learning technique under varying environmental conditions
	An embedded physics-based modeling concept for wireless structural health monitoring
	Damage evaluation and tracking using kriging approaches on wave-guide dispersion curves
	Prompt modal identification with quantified uncertainty of modal properties
	Wavelet-based transmissibility for structural damage detection
	Explainable framework for Lamb wave-based damage diagnosis
	Application development of distributed fibre optic sensors for monitoring existing bridges
	Real-time health monitoring of civil structures by online hybrid learning techniques using remote sensing and small displacement data
	Permanent tunnel lining monitoring system for the purpose of further design optimization
	On the data-driven damage detection of offshore structures using statistical and clustering techniques under various uncertainty sources: An experimental study
	Sustainable structural health monitoring using e-waste and recycled materials
	Corrosion of fasteners in concrete: Literature review and discussion of current test methods
	Plastic strain localization behavior of corroded steel plate under tensile loading
	Fundamental study on crack detection method for steel members by thermal image processing
	Deflection condition monitoring of asteel bridge via remote sensing techniques
	Condition rating for maintenance of existing reinforced concrete bridges in Soweto, South Africa
	Bridge collapse prediction by small displacement data from satellite images under long-term monitoring
	Structural damage identification using optimization-based FE model updating
	The implications of climate change effects on the response parameters of concrete arch dams with respect to anomaly detection
	Evaluation of changes in flexural rigidity of cracked concrete railway bridges under high-speed train passages
	Applying automated damage classification during digital inspection of structures
	Crack intensity closed form solutions by frequency measurements ondamaged beams
	Effect of 2-directional chloride ingress on concrete resistivity and corrosion rate of steel bars at orthogonal edges
	Measurement and simulation of pipeline attached to bridge for vibration-based SHM
	Investigation of modulation transfer due to nonlinear shear wave interaction with local source: Numerical and theoretical approach
20. Structural assessment, Historic structures, Masonry structures, Repair, Strengthening, Retrofitting
	Intermediate isolation system for the seismic retrofit of existing masonry buildings
	A seismic retrofitting design approach for activating dissipative behavior oftimber diaphragms in existing unreinforced masonry buildings
	Lifetime assessment for historical cast steel bridge bearings
	Strengthening of existing infrastructure with concrete screws as post-installed reinforcement
	Analytical formulation for plain and retrofitted masonry wall under out-of-plane loading
	Structural behavior of masonry walls with soft-layers: An overview of	experimental work
	Investigating the causes, impact, and repair methods of popping bricks in house construction
	Experimental investigation of the influence of embedment depth on the sustained load performance of adhesive anchors
	The review of diagonal compression tests of URM panels strengthened with NSM steel bars
	Rehabilitation applications of roadway structures
	Heritage protection and safety requirements: A difficult relationship
	Reconnaissance survey of historic monumental unreinforced masonry building by visual inspection: Acase study of senate hall building of Allahabad University, India
	On the characterization of materials and masonry walls of historical buildings: Use of optical system to obtain displacement maps in double-flat jack tests
	A computational procedure interacting with the Italian “CARTIS” online database to derive residential building portfolios for large scale seismic assessments
	Seismic assessment of acolonial adobe building in Cusco, Peru
21. Soil-structure interaction, Foundations, Underground structures, Geotechnical engineering, Rock mechanics
	Interaction between the deepest foundation piles in Germany and the superstructure
	Derivation of cyclic p-ycurves for the design of monopiles in sand
	Climate-smarter design of soil-steel composite bridges using set-based design
	Parametric modelling of integral bridge spring reactions
	A parametric study of the vibration of beams resting on elastic foundations with nonlinear cubic stiffness
	Degradation of axial friction resistance on buried district heating pipes
	A hybrid structure to protect infrastructures from high energy rockfall impacts
	Author Index
Author Index